IICRC certified inspectors and technicians thoroughly inspect each facet of the home, carefully noting any area of concern as it relates to existing mold, water intrusion, open windows, visible leaks, foundation cracks, sump pump failure, and excess moisture.

Set up complete isolation of the work area from occupied spaces using plastic (6 mil poly) sheeting sealed with duct tape. Ventilation ducts, vents, returns, and other openings are also sealed off.

HEPA air scrubbers are used to generate negative air pressure to prevent cross contamination of adjacent areas. These HEPA air scrubbers run throughout the remediation process to eradicate any airborne mold.

Any contaminated material that cannot be remediated will be removed and discarded (drywall, carpeting, padding, cabinetry, etc.). Loose material (insulation, dirt, debris, etc) is removed in sealed plastic bags and discarded.

We use quaternary ammonium, designed for use on various surfaces subject to microbial contamination. Any dark mold staining will be treated with a commercial grade mold and mildew stain remover formulated to immediately remove mold and mildew stains present on wood and other hard surfaces. This application eradicates mold stains on contact and penetrates soiled areas almost instantly, leaving surfaces clean and free from mold stains.

The entire worksite is swept free of debris and HEPA vacuumed. Meticulous HEPA vacuuming is essential to the proper application of our proprietary antimicrobial coating. Mold Solutions technicians are trained to search for areas where debris and other minor particles would otherwise go unnoticed. The use of HEPA vacuums minimizes the transference of collected particles. Special attention is given to all exterior wall cavities under any opening where water intrusion could occur.

All affected areas are then treated with our proprietary antimicrobial coating. This water-based, non-toxic, non-leaching, non-VOC emitting product is so effective at preventing the return of mold, that once it is applied, we back our work with a 10-year warranty!

A thorough post completion inspection is conducted to ensure there was a complete application of antimicrobials. Our certified technicians then remove all poly/tape, warning signs, and any other equipment or materials they brought to the job site. Within 7-10 of receiving final payment, you will be issued a fully-transferable 10-year warranty.